Tech Tips Category: Radiography
Adjusting the Collimator LED Assembly for LTF Scaling
In this tip, Kevin talks about adjusting the light to field sizing on the back of an R&F collimator, in this case on the Siemens Ysio X-ray platform.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Control Module Compatibility Configuration
In this tip, Kevin covers control module compatibility configuration on Siemens X-ray and Fluoroscopy systems.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Configuring the DAP Chamber
In this video Siemens medical imaging tech tip, Kevin covers configuring the DAP chamber on Siemens X-ray systems like this Siemens YSIO.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Adjusting Near Focus Blades on Collimators
In this tip Kevin discusses how to adjust the near focus blades on current Siemens Collimators. In this example he is on a Siemens Ysio X-ray system.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Setting CAN Transfer Rate on Siemens Collimator
In this tip, Kevin covers how to setup the CAN transfer rate on newer Siemens Radiography collimators. This particular collimator is on a Siemens Ysio X-ray system.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Troubleshooting Detector Power Supply Module
In this tip Kevin talks about when you see voltage fluctuations or power issues either at portable wall charger or inside table on Siemens R&F systems.
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Light to Field Adjustment on Current Siemens X Ray Systems
In this tip Kevin covers what you need to do in order to adjust the collimator so your Siemens Ysio, Luminos Agile or other systems are setup correctly. When you have a question about your Siemens Medical Imaging equipment, you need an answer, that’s where Technical Prospects comes in!
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Changing the Time in X-Ray Products
In this tip Chris is covering how to change the time through Siemens syngo in your Simens X-ray (Radiography) systems. When you have a question about your Siemens Medical Imaging equipment, you need an answer, that’s where Technical Prospects comes in!
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Changing Coronal Disks
Whether you’re replacing an X-ray tube or performing a PM (Preventative Maintenance) on an X-ray system, you are going to want to replace the coronal disks. Watch this tip as Chris covers how to do this! When you have a question about your Siemens Medical Imaging equipment, you need an answer, that’s where Technical Prospects comes in!
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
Megalix CAT Plus Tube Heating
Watch this week’s tip as Ken covers installing a Megalix CAT plus tube on Artis system. When you have a question about your Siemens Medical Imaging equipment, you need an answer, that’s where Technical Prospects comes in!
Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!
