Tech Tips Category: Computed Tomography

Using Breakout Box

In this tip, Kevin covers using a break out box when troubleshooting your Siemens Definition CT system. A good way to isolate and measure problems when diagnosing issues on your CT.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

Protecting Your CT Data Ring

In this tip Kevin covers a simple way to protect your Siemens CT data ring using the snap on plastic protectors that come with each system. A simple step that takes a few seconds but can save you from severe damage to the data ring.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

E-Box Bracket Siemens Sensation

In this tip, Kevin covers how to properly hook up the E-Box installation bracket and the kit assembly that comes with it for a Siemens Sensation CT system.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

Siemens CT Foam Protector

In today’s tip Kevin talks about a simple foam protector strip that comes with every Siemens CT system. Quickly can be installed on any system to save you from a good bump on the head!

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

Removing Front Cover on Siemens Definition CT

In this tech tip video, Kevin “covers” how to remove the front cover from your Definition CT scanner. Now that may sound simple but you’d be surprised how many engineers get to a facility and find it to be challenging. We hope this will save you time in the future!

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

Definition CT Balancing Kit

In this tip Kevin covers how to utilize the CT weight balancing kit that comes with Definition CT systems. The importance of making sure you put the right weight in the right spot to prevent errors.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

Shutting Power Off to Gantry

In this tip Kevin covers the safe way to service your Siemens Definition gantry by properly shutting off the power before beginning any service work.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip

HV Dummy Plugs for Siemens CT Systems

This tech tip discusses which High Voltage Dummy Plugs you need to use for the different Siemens CT system. Specifically the special plug needed on a Definition Flash system.

Have questions about this tip or any of our other Tech Tips? Please contact us and we will be happy to help you!

View Tip